Bis axial ligation of simple imine and methyleneamido groups by ruthenium porphyrins

Bis(N-ethylideneethanamine)ruthenium(ii) porphyrins, [Ru11(Por)(N(Et)=CHMe)2] (Por=TTP, 4-Cl-TPP), were prepared by the reaction of dioxoruthenium(VI) porphyrins with triethylamine in approximately 85% yields. The reaction between dioxoruthenium(VI) porphyrins and benzophenone imine afforded bis(diphenylmethyleneamido)ruthenium(IV) porphyrins, [Ru(IV)(Por)(N=CPh2)2] (Por=TTP, 3,4,5-MeO-TPP), in approximately 65% yields. These new classes of metalloporphyrins were characterized by 1H NMR, UV/Vis, and IR spectroscopy as well as by mass spectrometry and elemental analysis. The X-ray crystallographic structures of [Ru(II)(TTP)(N(Et)=CHMe)2] and [Ru(IV)(3,4,5-MeO-TPP)(N=CPh2)2] revealed an axial Ru-N bond length of 2.115(6) A for the imine complex and 1.896(8) A for the methyleneamido complex. Each of the N=CPh2 axial groups in [Ru(IV)(3,4,5-MeO-TPP)(N=CPh2)2] adopts a linear coordination mode with a corresponding Ru-N-C angle of 175.9(9)degrees. Spectral and structural studies revealed essentially single bonding character for the bis(imine) complexes but a multiple bonding character for the bis(methyleneamido) complexes with respect to their axial Ru-N bonds.     

A tridentate CNO‐donor palladium(II) complex as efficient catalyst for direct C―H arylation: Application in preparation of imidazole‐based push–pull chromophores

A series of imidazolium chlorides for the formation of tridentate CNO‐donor palladium(II) complexes featuring N‐heterocyclic carbene moieties have been developed from cheap and readily available starting materials with high yields. Their palladium complexes were prepared by reactions between the ligand precursors and PdCl₂ using K₂CO₃ as base in pyridine with reasonable yields. These air‐stable metal complexes were characterized using ¹H NMR and ¹³C{¹H} NMR spectroscopy and elemental analyses. Heteronuclear multiple bond correlation experiments were performed to identify key NMR signals of these compounds. The structures of two of the complexes were also established by single‐crystal X‐ray diffraction analysis. One of these complexes was successfully applied in the direct C―H functionalization reactions between heterocyclic compounds and aryl bromides, producing excellent yields of coupled products. The coupling reactions were scalable, allowing grams of coupled products to be obtained with a mere 2 mol% of Pd loading. The catalyst system developed allowed the large‐scale preparation of several push–pull chromophores straightforwardly. Photophysical properties based on UV–visible and fluorescence spectroscopy for these chromophores were investigated. Deep blue photoluminescence with moderate quantum efficiency and twisted intramolecular charge transfer excited state were observed for these chromophores. Density functional theory (DFT) and time‐dependent DFT calculations were performed to support the experimental results.     

Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface

An experimental study was performed to investigate the effect of surface coating on the critical heat flux for downward facing boiling on the outer surface of a hemispherical vessel. Steady-state boiling experiments were conducted in the subscale boundary layer boiling (SBLB) facility using test vessels with metallic microporous coatings to obtain the local boiling curves and the local critical heat flux (CHF) limits. Similar heat transfer performance was observed for microporous aluminum and microporous copper coatings. When compared to the corresponding data without coatings, the boiling curves for the coated vessels were found to shift upward and to the right. This meant that the CHF limit was higher with surface coating and that the minimum film boiling temperatures were located at higher wall superheats. In particular, the microporous coatings were found to enhance the local CHF values appreciably at all angular locations explored in the experiments. Results of the present study showed that the microporous aluminum coating was very durable. Even after many cycles of steady state boiling, the vessel coating remained rather intact, with no apparent changes in color or structure. Although similar heat transfer performance was observed for microporous copper coatings, the latter were found to be much less durable and tended to degrade after several cycles of boiling.     

Liquid crystal mixtures for potential infrared applications

Liquid crystals (LCs) with diazo linkages have high dielectric and optical anisotropy. Two newly synthesized liquid crystalline compounds were dissolved in room temperature LC hosts, E7 and PTTP-24/36, to assess their properties. It was found that these mixtures have higher birefringence, larger dielectric anisotropy, and better elastic properties than the hosts. Satisfactory viscoelastic coefficients were also obtained for these mixtures, showing that they are promising LC materials for applications in the near IR region.     

Determination of a novel antifibrotic small molecule GDC‐3280 in human plasma and urine by liquid chromatography tandem mass spectrometry to support its first‐in‐human clinical trial

A specific and robust LC–MS/MS method was developed and validated for the quantitative determination of GDC‐3280 in human plasma and urine. The nonspecific binding associated with urine samples was overcome by the addition of CHAPS. The sample volume was 25 μL for either matrix, and supported liquid extraction was employed for analyte extraction. d6‐GDC‐3280 was used as the internal standard. Linear standard curves (R² > 0.9956) were established from 5.00 to 5000 ng/mL in both matrices with quantitation extended to 50,000 ng/mL through dilution. In plasma matrix, the precision (RSD) ranged from 1.5 to 9.9% (intra‐run) and from 2.4 to 7.2% (inter‐run); the accuracy (RE) ranged from 96.1 to 107% (intra‐run) and from 96.7 to 104% (inter‐run). Similarly, in urine the precision was 1.5–6.2% (intra‐run) and 1.9–6.1% (inter‐run); the accuracy was 83.1–99.3% (intra‐run) and 87.1–98.3% (inter‐run). Good recovery (>94%) and negligible matrix effect were achieved in both matrices. Long‐term matrix stability was established for at least 703 days in plasma and 477 days in urine. Bench‐top stability of 25 h and five freeze–thaw cycles were also confirmed in both matrices. The method was successfully implemented in GDC‐3280's first‐in‐human trial for assessing its pharmacokinetic profiles.     

Synthesis of symmetrical and unsymmetrical diindolylmethanes via acid-catalysed electrophilic substitution reactions

A range of activated indole-2-carboxylate derivatives was prepared via the Hemetsberger indole synthesis. Vilsmeier formylation was explored to establish regioselectivity and to prepare a range of new indole carbaldehydes. The indole aldehydes were reduced to the corresponding hydroxymethylindoles in good yields by the use of sodium borohydride in THF. Symmetrical 4,4′-, 6,6′- and 7,7′-diindolylmethanes were prepared via the acid-catalysed reaction of the corresponding hydroxymethylindoles. Furthermore, the treatment of methyl 4-hydroxymethyl-5,6-dimethoxyindole-2-carboxylate and a range of methyl indole esters with acetic acid led to the formation of unsymmetrical 4,6′- and 4,7′-dindolylmethanes.     

A stochastic expectation-maximization algorithm for the analysis of system lifetime data with known signature

Statistical estimation of the model parameters of component lifetime distribution based on system lifetime data with known system structure is discussed here. We propose the use of stochastic expectation-maximization (SEM) algorithm for obtaining the maximum likelihood estimates of model parameters based on complete and censored system lifetimes. Different ways of implementing the SEM algorithm are also studied. We have shown that the proposed methods are feasible and are easy to implement for various families of component lifetime distributions. The proposed methodologies are then illustrated with two popular lifetime models—the Weibull and Birnbaum-Saunders distributions. Monte Carlo simulation is then used to compare the performance of the proposed methods with the corresponding estimation by direct maximization. Finally, two illustrative examples are presented along with some concluding remarks.     

Bioprinting of Collagen: Considerations,Potentials, and Applications

Collagen is the most abundant extracellular matrix protein that is widely used in tissue engineering (TE). There is little research done on printing pure collagen. To understand the bottlenecks in printing pure collagen, it is imperative to understand collagen from a bottom‐up approach. Here it is aimed to provide a comprehensive overview of collagen printing, where collagen assembly in vivo and the various sources of collagen available for TE application are first understood. Next, the current printing technologies and strategy for printing collagen‐based materials are highlighted. Considerations and key challenges faced in collagen printing are identified. Finally, the key research areas that would enhance the functionality of printed collagen are presented.